Selling-list
Selling-list
- AISI 1020 Hot Rolled Plates
- AISI 1020 Hot Rolled Plates Chemical Composition (heat analysis, by mass % unless otherwise specified) Carbon (C): 0.170 0.230 Manganese (Mn): 0.300 0.600 Phosphorus (P): 0.040 max. Sulfur (S): 0.050 max. AISI 1020 hot rolled plate is a general purpo
- Read more »
- SA516 Gr.70+N High Strength Plates
- SA516 Gr.70+N high strength plates refer to normalized steel plate product. For ASME SA516 Gr.70 steel plate and sheet thinner than 40mm we normally supply them as rolled-steel coil, the plates with thickness above 40mm are supplied normalized. SA516
- Read more »
- Grade 17-7 PH Stainless Steel Physical Properties
- Grade 17-7 PH is a precipitation hardening stainless steel. It provides high strength and hardness and a moderate level of corrosion resistance up to 600˚F. Grade 17-7 PH is a chromium-nickel-aluminum precipitation hardening stainless steel. Grade 1
- Read more »
- 630 Martensitic Stainless Steel Plates Stockist
- As a professional 630 martensitic stainless steel plate stockist, BEOBN will offer 630 martensitic stainless steel plates with thickness up to 60mm. We also offer 630 hot rolled stainless steel sheets and 630 cold rolled stainless steel coils direct
- Read more »
- ASTM A240 309/ UNS S30900 Stainless Steel 2B Surface Cold Rolled Sheet
- Stainless steel ASTM A240 309/ UNS S30900 sheet is available in 2B, 2D, Bright Annealed(BA), mirror, 8K or polished surface finish. ASTM A240 309 stainless steel cold rolled sheet is mainly used for pressure vessel application or any other fields. T
- Read more »
- 904L Austenitic Stainless Steel Coils Characteristics
- Grade 904L is an austenitic stainless steel intended for use under severe corrosion conditions, with a very good resistance to attacks in acidic environment, as sulphuric, phosphoric and acetic acid. The high chromium content promotes and maintains a
- Read more »
- ASTM A709 Alloy Steel Plates for Bridges
- ASTM A709 high strength low alloy steel plate is ASTM certified structural steels for the bridges and construction industry. ASTM A709 bridge steel plates maintain a tensile yield strength of 50,000 psi and an ultimate tensile strength of 65,300 psi.
- Read more »
- ASTM HSLA Steel Plates
- ASTM A572, ASTM A588, ASTM A606, and ASTM A709 standards are high strength low alloy(HSLA) steel. ASTM HSLA steel is referred to alloy elements less than 3.5% of the total. Relative to carbon steel, low alloy steel, on the basis of carbon steel in or
- Read more »
- Martensitic Stainless Steel AISI 410 Corrosion Resistance
- AISI 410 martensitic stainless steel corrosion resistance : AISI 410 stainless steel offers good corrosion resistance to atmospheric corrosion, water and some chemicals. Its optimum corrosion resistance is in the hardened and tempered condition and i
- Read more »
- AISI 310S Austenitic Stainless Steel Coils
- AISI 310S Austenitic Stainless Steel Coils Standards: UNS S31000 AMS 5521 ASTM A240 ASTM A312 AISI 310S is a highly alloyed austenitic stainless steel designed for elevated-temperature service. AISI 310S austenitic stainless steel coils have excelle
- Read more »
- AISI 904L Grade Stainless Steel BA Plate
- AISI 904L grade stainless steel BA plate is widely used in the chemical, pharmaceutical, oil and gas industries. AISI 904L grade stainless steel BA plate, coil, sheet is a fully austenic low-carbon variety of stainless steel with additives of molybde
- Read more »
- 0.06" (16 GA.) Stainless Steel Coils 410 Coils
- 0.06 (16 GA.) Stainless Steel Coils 410 Coils 0.06 (16 GA.) stainless steel 410 is a traight chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainless steels.
- Read more »