201 Stainless Steel Composition & Manganese Austenitic Properties
201 is an economical austenitic stainless steel in which manganese and nitrogen partially replace nickel to stabilize the austenitic structure, reducing production cost compared with 300 series grades. Its chromium content of 16–18% provides the basic passivation film, while the manganese content of 5.5–7.5% and nickel content of 3.5–5.5% maintain the austenitic phase at normal prices of raw materials.
The grade is supplied in the solution-annealed condition with a tensile strength of at least 520 MPa, a yield strength of about 275 MPa and good elongation above 40%. It cannot be hardened by quenching and is strengthened only by cold working, so cold rolling, bending and drawing markedly increase hardness and strength. The material is non-magnetic after solution treatment but may show slight magnetism after cold deformation, which is a normal characteristic of the 200 series. Its corrosion resistance is lower than that of 304, so it is suited to dry indoor and general decorative environments rather than chloride-bearing or strongly corrosive service.
201 stainless steel is supplied as sheets, coils, decorative tubes and profiles, and is widely used in architectural decoration, guardrails, kitchen and bathroom trim, furniture hardware, watch cases and light drawing products where appearance and cost take priority over maximum corrosion resistance.