2507 Stainless Steel Composition & Super Duplex Strength Properties
2507 is a super duplex stainless steel with a balanced ferritic-austenitic microstructure containing approximately 50% of each phase. Its chromium content of 24–26%, molybdenum content of 3–5% and nitrogen content of 0.24–0.32% give a pitting resistance equivalent number above 40, providing outstanding resistance to pitting, crevice corrosion and chloride stress corrosion cracking in seawater and other aggressive chloride media.
The grade is delivered in the solution-annealed and water-quenched condition and is not hardenable by subsequent heat treatment. In this condition it offers a minimum yield strength of 550 MPa, a tensile strength of 795–1000 MPa and an elongation of at least 15%, which is roughly twice the yield strength of standard austenitic grades such as 316L. This strength level allows thinner wall sections and lighter structures in pressure equipment. Service temperature is normally limited to about 250–300°C to preserve the phase balance and toughness.
2507 stainless steel is supplied as plates, sheets, tubes, pipes, bars and fittings, and is applied in offshore platform piping and subsea equipment, desalination plants and seawater systems, oil and gas downhole and sour service components, flue gas desulfurization scrubbers, and chemical processing vessels handling chloride-bearing acids.